Flashforge Creator Pro Dual head 3D-printer

  • Build volume: 227x148x150mm
  • Extruders: 2
  • LCD+SD: Yes
  • Filament diameter: 1.75mm
  • Auto bed leveling: Yes
Voorraad: 17
€ 625,00  incl BTW Op voorraad
Zelfde werkdag verzonden!


The Flashforge Creator Pro enables you to make more advanced 3D prints, with it's two extruder direct drive system. This makes it possible to use two materials in your print. For example PLA and PVA filament to create prints with soluble supports. The Creator pro is pre assembled and plug-and-play. After installing the provided software, you can immediately start 3D printing!

The Creator Pro is controlled using an easy user-interface on a LCD screen. You can either print from SD card or directly from your PC over USB. For your convenience there is a LED light which can be turned on to light up the print area. The metal frame creates a sturdy housing that will heat up with the heated buildplate, so printing ABS or other advanced materials will be easier.The Flashforge comes with the FlashPrint software, but the printer will also work with other slicer software,

Included with the printer is also:

  • Two spools of filament,about 1kg/spool
  • Acryl cover set
  • 4GB SD card with software and manual
  • USB cable
  • Tools and accessories


Bed breedte 22 cm
Bed diepte 15 cm
Bouwhoogte 15 cm
Resolutie X-as 0.2 mm
Resolutie Y-as 0.2 mm
Resolutie Z-as 0.1 mm
Extruder eigenschappen
Aantal extruders 2
Diameter nozzle 0.4
Filament typen PLA, PVA
Filament diameter 1.75 mm
Hot-end type MK10
Max. hot-end temperatuur 240 °C

Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here

Max. verwarmd bed temp. 120 °C
Breedte 53 cm
Hoogte 55 cm
Diepte 36 cm

A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.

Verwarmd Bed

A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.

More info

Automatische Bed Leveling

The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.


This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.


This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.

€ 625,00  incl BTW Op voorraad
Zelfde werkdag verzonden!

Over de materialen

Footer page link

Als u een vraag heeft kunt u dit formulier invullen.

RepRapWorld B.V.
Klopperman 7
2292JE Wateringen
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2020 | ReprapWorld B.V.