eSun

ABS filament Red 1.75 mm / 1 kg eSun

SKU:ABSRED1000MM175
GTIN:6922572221093
Voorraad: 9
€ 21,25  incl BTW Op voorraad
Slechts 9 beschikbaar, bestel nu!
Variant
ABS
ABS+
Kleur
    ABS filament Blue 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • blauw
  • ABS filament Yellow 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • geel
  • ABS filament Gray 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • grijs
  • ABS filament Green 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • groen
  • ABS filament Neutral 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • naturel
  • ABS filament Red 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • rood
  • ABS filament Warm White 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • wit
  • ABS filament Silver 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • zilver
  • ABS filament Black 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • zwart
Diameter
1.75 mm
2.85 mm
Productopties
Adhesion spray 400ml|ABS, PLA and PETG
3DLAC
Adhesion spray 400ml
ABS, PLA and PETG
Your best defense against warping and prints loosening from the bed
€ 11,50
High-quality PLA filament|Black 1.75 mm / 1 kg
REAL Filament
High-quality PLA filament
Black 1.75 mm / 1 kg
Best choice PLA filament for the best results
€ 24,99

Productbeschrijving

Great ABS filament Red 1.75 mm 1000 g for 3D printers. eSun filament gives you an affordable material with consistent quality.

ABS (Acrylonitrile Butadiene Styrene) filament has been in use for 3D printing for a long time. It used to be the most popular 3D print material, but due to the properties of ABS including high shrinkage it's hard to work with. Compared to other materials ABS still has some advantages including that its gasoline resistant, non-translucent and a soft bendable thermoplastic. Also compared to PLA it has a much higher glass transition point. ABS is an oil based product, making it less environmentally friendly than PLA is, and while printing it tends to give a bad chemical smell, so you probably want to use this in well ventilated conditions.

This filament will require more effort to print well. If you are using ABS to print small strong parts, you may get away with just using 3DLAC on a 65-80 degrees heated bed. Kapton tape is another product where ABS will print on, but it will require a higher temperatures around 110 degrees. For extruding the filament we recommend a temperature of 245 degrees, although it may extrude as low as 220 degrees, the layer bonding won't be as strong. For larger prints you should look into PETG filament first, without a heated chamber you will not be able to print this material without warping and cracking.

The Real ABS comes in many different colors directly from stock. For larger quantities and custom batches, feel free to contact our sales department.

Specificaties

Maatvoering spoel
Buitenste diameter 200 mm
Binnenste diameter 50 mm
Breedte 65 mm
Gewicht spoel 300 g
Gewicht filament 1000 g
Lengte filament 400 m
Printeigenschappen
Materiaal

The base material used in the filament. For more information on the different materials, please check the Filament information page

ABS
Variant ABS
Temperatuur - extruder 230 - 250 °C
Temperatuur - verwarmd bed 60 - 70 °C
Verwamd bed temp. - Kapton 90 - 110 °C
Kleurcode (benadering) Pantone 2350C
Kleur Rood
Diameter 1.75 mm
€ 21,25  incl BTW Op voorraad
Slechts 9 beschikbaar, bestel nu!
Variant
ABS
ABS+
Kleur
    ABS filament Blue 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • blauw
  • ABS filament Yellow 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • geel
  • ABS filament Gray 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • grijs
  • ABS filament Green 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • groen
  • ABS filament Neutral 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • naturel
  • ABS filament Red 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • rood
  • ABS filament Warm White 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • wit
  • ABS filament Silver 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • zilver
  • ABS filament Black 1.75 mm / 1 kg eSun

    € 17,56
    Meer Info
  • zwart
Diameter
1.75 mm
2.85 mm

Prijsstaffel

1 - 9: excl € 17,56 incl € 21,25
10 - 29: excl € 16,68 incl € 20,19
30 - : excl € 15,81 incl € 19,13
Groter aantal nodig? Neem contact op met Verkoopafdeling.

Gerelateerde producten

KWB Sanding Paper K180 (Fine) Roll of 93 mm x 5m
KWB
Roll of general purpose K180 (Fine) sanding paper to sand your 3D prints
  € 4,75
Spatula tool ( 80 mm )
  € 5,45
Hygrometer with thermometer
  € 6,50
Modifi3d Pro - Repair and modification tool
  € 74,95

Over ReprapWorld
ReprapWorld

RepRapWorld is de nummer één webshop voor al uw reprap benodigdheden voor uw 3D printer. We hebben een grote collectie 3D-printer onderdelen, van onze beroemde elektronica lijnen tot filament van onze eigen productie. En dit alles aan een zeer scherpe prijs!

Contact

RepRapWorld B.V.
Klopperman 7
2292JE Wateringen
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2021 | ReprapWorld B.V.